Pages

Showing posts with label Light Infantry. Show all posts
Showing posts with label Light Infantry. Show all posts

Monday 13 March 2023

Grenz - advancing.

Back in August (post 22/08/22) I cast some of the advancing Grenz figures - I have finally got around to painting up a unit.


The figures are individually based so they can be used either as a close order unit as shown or singularly as skirmishers.


The rank and file and drummer are from the new mould, and the officer and standard bearer from the Hungarian moulds, which are close enough - I gave the officer a musket as it looks better when skirmishing (I think it is from the Russian officer).


I also painted up a couple of spare figures to replace the standard bearer and drummer when used as skirmishers. One of these was an NCO using the Hungarian NCO, again with a musket; however the coat tails are way too long, so he will probably stay in the box.

On the 40mm semi-flats figures I generally stick with block painting and don't use any washes or highlighting. The exception to this is a localised wash of Winsor and Newton 'Peat Brown' ink on the hands and faces to bring out the detail, I do this after a first coat of spray gloss varnish so that it does not stain, then tidy up with flesh prior to a final brushed gloss coat of Tamiya clear gloss.

On these I also dry brushed the hats a little to bring out the texture. Initially I dry brushed white which looked way to harsh, so I went over it with a dry brush in black - so I suppose it is like doing it in grey. On the subject of heads, I struggled getting decent castings in my 'scrap metal', so these are mostly cast in model metal (the bodies are about 50/50).

Monday 22 August 2022

New Grenz Mould

 A couple of weeks ago I got my greasy mitts on the new Grenz mould containing the advancing figure and drummer.

I am in the middle of another project at the moment (20mm WW2 Normandy - I went there earlier this year), so it could be a while before I get around to painting up a unit. However, I was interested to see how the figures have turned out, so spent a few hours casting up enough the figures for a couple of 16 man units.


My current casting set up is in my garage/wargames room - pretty simple and easy to pack up:
  • The base board is just an offcut of kitchen unit shelving, it is fine under hot figures and small spillages, but would blister if a large lump of melted/hot metal was left in the same place for too long.
  • A 300W solder pot (a bit bigger than the one PA sell) - and PA ladle.
  • There is also a cheap digital thermometer (the thin twisted black wire on the right).
  • Moulds (usually in pairs) are normally just held by 3 elastic bands, but this one needed a bit of extra pressure in the middle to prevent flash, so there is an additional PA clamp.
  • I have a pin vice handy to push 1mm holes through the mould sides in difficult areas, in this case  it needed vents in the lower tips of both sword scabbards.
  • Pliers for getting the figures from the moulds and snips for cutting off the ingates etc.
Below are photos of the new Grenz figures 'as cast' using Model Metal, I have cut off the ingates etc. but not cleaned them up any further - the head is 'as cast' and just pushed in. (You can see the marks on the scabbards where I have drilled vents.)





They are pretty clean and should not take a lot of preparation and I think will paint up well.

I intend to make 16 man 'close order' units, with 13 advancing, the drummer plus an officer and standard bearer from the Hungarian range. I will base them on single bases so that they can also act in open order.

I have also cast up a unit using 'scrap metal', they also cast easily, detail is not as crisp, but should also paint up well.

I hope someone buys them - as I had to twist PA's arm to get them made😟.

Tuesday 29 March 2022

More Grenz Infantry?

Prince August have agreed to produce another mould to add variety to the Grenz, and we are trying to finalise what figures to include.

Advancing

Most importantly (from my point of view anyway) is an advancing figure, which will serve two main purposes:

  • It can be mixed into the skirmishing line to both give variety and stop the advancing officer sticking out like a sore thumb amongst the stationary firing poses.
  • It can also be used to make up units of Grenz in close order.


Sculpting is almost complete, below are come screen shots of the near complete figure, in the same stance as all the other advancing figures.















Second Figure???

If PA stick with just one more mould, then what other figure is best to occupy the second space? There was a lot of similarity between the uniforms of the Grenz and Hungarian infantry, so the range needs to make best use of the Hungarian moulds:

  • Officer - the Grenz and Hungarian officers were very similar, so there is no point in making another.
  • Standard Bearer - it is doubtful the Grenz carried standards in the field, however if one is wanted (I will add one), then again the Hungarian officer with standard will be fine.
  • NCO - a possibility, but perhaps a luxury.
  • March Attack - again a possibility, however I envisage most Grenz on the table in 'open order' a lot of the time, so march attack not really 'dual purpose'.
  • Musician - I think a musician is a must for any respectable close order unit. Little seems to be known about their uniforms, however I suspect they would be similar to the rank and file,

So in conclusion, I think the musician is the best bet for the second space, allowing close order units with the new advancing and musician figures plus Hungarian officer and standard bearer.

Grenz Musicians?

I have scoured my books and the internet, and can find very little about Grenz musicians. I suspect they should be drummers uniformed similar to the rank and file, although Crusader Miniatures give them a hornist? Just after the war I have read that they had 'swallows nests' on their shoulders, and Minden figures have them so it should be OK to add them.

If any of you have any details could you please let me have them, otherwise we will go with a drummer uniformed as the line but with swallows nests. 

As always comments and suggestions welcome.

Friday 19 November 2021

Austrian Jager

I've just completed a small unit of Austrian jager,

For these I used the following figures:

  • The new infantry kneeling and standing firing
  • The new hornist
  • The Russian infantry officer with 'musket'
  • The Prussian NCO with 'musket' from Russian officer
  • The Prussian advancing infantryman
  • The new jager head

My troops have gaiters rather than the high boots depicted in most illustrations. The figures have gaiters, and the information is contradictory, I did not feel it worth the effort of showing boots, which would be difficult to model on the bent legs.

The casket in the mould is not quite right, so I made a couple of modifications:

  • The casting has a domed top, whereas I think it should be level - not a difficult job to file it down. (Do it before sticking on the plume, I had not spotted the need to file the top down until after I had glued on the plume, which made it more tricky).
  • They are usually shown with a green plume, which is not present in the mould. I made one by cutting the bayonet off the muskets (see below), gluing it on the side, cutting to length (it is easier to cut off the top after gluing, as it gives more to hold as the glue sets (superglue and accelerator)), and then roughening up the sides using a mini-drill.
All of the figures have the musket cut down to a rifle. The Austrian jager rifle was 1120mm long. Assuming an infantryman is 5'5" (1652mm), with the figures standing 42mm high this gives a length of 28.5mm.

I quite enjoyed making these, they are a good example of what we have been trying to do with the range, making a figure which is close to the historical detail by mixing and matching other components.

Sunday 17 October 2021

Prussian Frei Korps


Following on from the Grenz I have painted a a small 8 man unit of 'double blues'.

The new firing infantry are nice figures, and are designed to mix in with the very first Prussian moulds. The bodies are cast in 'scrap metal' and came out reasonably well, however I used heads from the original Prussian moulds (cast in Model Metal), as I prefer the proportions of the older heads.

A rear shot, the kit is similar to the original figures, however size is inconsistent, but they look fine mixed together - the chaps will go thirsty as the water bottle is missing.

Comparison with the original Prussian infantryman (they have heads from his mold), even with the different kit size they mix fine.

On this occasion I decided to go a little down the 'imagination' route and give the troops the new hornist figure as their musician; these are skirmishing troops in my army, and the horn looks far more appropriate than a historically correct drum (and it used the brand new figure). Using similar logic they are commanded by the new staff officer. - I can see him popping up in all sorts of places. 


And finally a mix of the old and new figures.

Next I think a couple of mounted officers.

Wednesday 6 October 2021

Austrian Grenz

 I finally got around to casting and painting up some Grenz - just a small 8 man unit for use using the 'A Gentleman's War' rules (which are highly recommended).

These are (currently?) the only two Grenz figures in the range, with no dedicated command. To complete the unit I also cast and painted up a Hungarian officer (with a Russian officer's musket) to act as their commander, size wise he fits in OK; however he looks a bit odd in an advancing pose when the rank and file are all stationary firing.


The original plan was to also have an advancing figure, so after mixing in a few of those the advancing officer would look fine. I will have another attempt to have some more Grenz figures made - if anyone else wants them then let me know, and it would help if you contact PA on their Facebook page to ask them to make some more Grenz poses.

Casting wise;  I struggled to get the fine detail, particularly on the face and shako fur, however they paint up fine.  I was using my 'scrap' metal which often struggles to produce fine detail, I had run out of Model Metal, but now have some, so will see if I can get better results next time I have a casting session.

I have also cast some light infantry and generals, which I hope to get painted in the next week or so.

As always your comments would be appreciated.

Sunday 15 August 2021

New Releases! Generals and Light Troops

Yes I am still here, however I have not done anything with my semi flats for some time.

I recently had an email to say that PA have (finally) released four more moulds, and that there is a 10% discount if you buy the full set.

I have to confess I have not yet seen these moulds, so have not had chance to try them out and see how they cast. The packaging illustrations are prints of the computer generated designs - not castings.

The moulds are labelled 'Austria', however they are intended to be more generic than has been the case previously, and to produce figures that are 'near enough' to fill some of the gaps that exist across all of the armies. 

General Officer

The mounted general officer is based on the Austrian uniform, with different heads (from other moulds) and varying paint jobs he should do nicely for all of the armies. 

We decided to try and make something a little different from the usual pointing with sword, so went for the raised hat and pointing with baton. Hopefully a dragoon or cuirassier arm can be used if a sword is wanted.


Light Infantry

These have been 'a little while' in the making - looking back through the blog the discussions about what figures to produce were back in September 2014, and then the first sculpting shots were back around Christmas 2019 - no one can say they were rushed out!

Grenz & Pandours

Currently just a single mould for these, the kneeling and standing firing poses are fine for skirmishing. I would have liked to have seen another mould with an advancing pose paired with either one marching or loading - any thoughts?

The mould contains heads for Austrian grenz, Russian pandours and also a mirliton to make the various frei corps units.

The Hungarian officer will stand in nicely for their commander.



 Frei Korps and Jager

Although labelled 'Austria', the second light infantry mould is even more generic, designed to cast figures which will be acceptable  for a wide range of troops; again a single mould with two firing figures. The figure's kit is the same as the Prussian infantry figures, so can be mixed with the earlier moulds (and would make a close order firing line).

Officers can be provided by the line infantry moulds.

The figures have gaiters, so are correct for light troops such as Prussian frei korps, however as they have gaiters they are not quite right for jager (although these are also sometimes shown in gaiters).

The mould includes a head with an Austrian jager style casket, so the figures will also give a reasonable approximation of the Austrian jager, again as they have gaiters they are not quite right .




General Officer on Foot and Hornist


The general officer is intended to be paired with the mounted officer to make a command group, with the two of them having a chat.

The hornist should add a little more variation to the skirmishing lines.




Hopefully I should get the moulds soon and will see how they cast.

As always comments are welcome.



Saturday 2 January 2021

HAPPY NEW YEAR & SYW Update


Best Wishes to everyone for the New Year.


Sorry I've not written anything for a while, my gaming interests have been elsewhere.

With lock down I have not had much chance to play with my toy soldiers, however I have done a lot of on-line gaming. A group of us have been playing Commands and Colors Napoleonics, using the VASSAL platform for the game and DISCORD for the chat. If any of you are feeling a need to get some interactive gaming done I can highly recommend this combination, as to play requires constant discussion/interaction between players, so almost as good as a face to face game.

Plans for the SYW Range

I have recently had a chat with Chris Tubb, PA's sculptor, who assures me that PA are planning to continue/complete the SYW range, however as you can imagine the pandemic has made things difficult for them.

The good news is that I am in possession of 3D prints of some of the next releases, which will comprise a mounted general, grenz and other light troops, as discussed in previous posts these will have a variety of poses and heads so will cover most armies. Hopefully we should see these in production in the next couple of months.

Everyone take care - hopefully we will all be gaming again soon. 

Sunday 22 December 2019

Christmas 2019 - Light Infantry Update

As its that time of year again, I thought it worth logging on and wishing you all the best for Christmas and New Year, letting you know I am still here, and also giving you a bit of an update.........

I've not been doing s lot with the 40mm figures recently, however I have almost finished a couple of cavalry units, one of Prussian dragoons and the other Austrian horse  grenadiers, they just need the flags (ordered from Maverick) - I will post some photos when they are finished.

Future Releases


Although releases are few and far between, PA are still working on the range, and hopefully there should be some new releases in the not too distant future?

Grenz/Pandours


Sculpting is ongoing for some skirmishing Grenz/Pandour troops, and the plan is to have four poses, as discussed back in September 2014 (no point rushing is there):
Light Infantry (2) - Grenz & Pandours - Sept 2014

So far I have only seen images of the standing and kneeling figures, below is a sample of what I have been sent (these are computer images).


The kneeling figure looks to be almost there, as discussed back in 2014 the figures will have the 'Type F2' coat (the lacing on the coat was deliberately simplified so that it can be moulded and drop cast better) and is combined with 'Type K'  footwear.


As with the rest of the SYW range there will be separate heads. The main heads will be the fur hat for the Croats (on figure above), and a tapered shako to allow a close approximation to a Russian pandour (not shown).


The standing figure is also well advanced, but note that the head is an early option which will probably not be used - so visualise him wearing the same fur hat as the kneeling figure.


If there is space the plan is to fit in a head with a mirliton, not strictly correct for this figure, but useful to make Freikorps von Kleist in conjunction with either these moulds or the Hungarian ones (see post back in Feb 2019):
 Freikorps von Kleist - March 2019

Hopefully there will also be a figure advancing in the 'standard' pose so they can be ranked up, plus a loading figure.

Hungarian figures can be used for the command.

Other Light Troops


PA are also working on the troops for use as skirmishing Freikorps types, these should have kit similar to the Prussian line infantry, but with the firing and loading poses.


Heads for these will include a 'casket' to make up Austrian jager or similar (but they will have to be modelled with gaiters rather than boots).

As always feedback would be appreciated.

I hope Santa brings you plenty of lead - and not too much of that horrid plastic 😉


Sunday 1 September 2019

Wild Geese Wargames & Future Plans

I thought I had better just let you know that I am still here😀

Wild Geese Wargames Weekend (22-23rd June)

When I last wrote I was frantically casting and painting the new dragoons for a gaming weekend over the weekend 22-23 June - I managed to get just the two units finished.

The weekend went pretty well, and the 40mm semi flats were generally well received. Unfortunately I somehow managed to pretty much forget to take photos, and those which I did were out of focus! Below are a few I have lifted from other blogs.




We played 3 games over the weekend using the 'Gentleman's War' rules which worked well with these figures. For those of you with the rules - we used 2 packs of cards, one for each half of the table - this speeded up play nicely.

Clearly we were playing a game - not putting on a display, so there is all sorts of mess on the table, however the plain cloth did show the figures off nicely.






Since then I have not touched the 40mm figures, and have mainly been playing Commands and Colors Napoleonic using 15mm figures.



This is not the place to discuss these small chaps - if you are interested here is a link to a write up of our last game.
http://scrivsland.blogspot.com/2019/08/battle-of-vimeiro-1808-using-command.html


Future Releases

I am told that PA are planning to release some new moulds in the (near) future. I have asked that the next releases are some Austrian grenz (Russian pandours) and a general officer.

For the light troops I pointed Chris to the posts back in September 2014 (no rushed job this) - I will keep you informed.

Saturday 1 June 2019

Frei Corps Loudon

In order to provide the Austrians with some light troops I have painted up a unit of Frei Corps Grun Loudon. (I know they probably did not fight in open order - but until the Grenz moulds are available I wanted something).


For the figures I used the following:

  • Officer - Prussian with Russian officers head (I do like that head)
  • Standard bearer - Prussian with Russian musketeer head (I did not want a pom-pom)
  • Drummer - Prussian (with no arm chevrons (I filed them off of the model I have))
  • NCO - Prussian with Russian head and musket.
  • Rank and file - Prussian musketeer, as I wanted troops with a sword - plus a Russian musketeers head.

The figures above are in my standard 16 man unit, and are shown in close order. However for skirmishing they are all individually based, and I decided that in that role they should lose the  standard and drummer, so I have replaced them with another NCO, and an officer with musket, using a Russian officer (with the gorget and lapel buttons removed).























Sunday 31 March 2019

Freikorps von Kleist

Prussian Light Troops


I decided to make some light troops for a project I am planning. Hopefully PA will bring out some dedicated moulds in the near future, however in the meantime I had a play with what I currently have available.



The bodies for the troops are the Hungarian infantry, with a few changes:

  • Mirliton heads have been used on the NCO and rank and file. These were kindly donated by Aly Morrison (see post 20 March 2017), hopefully something similar will be made available by PA in the not too distant future? (Kronoskaf states that a tricorns was also worn.)
  • The tricorns for the officers and drummer are from the Prussian guard infantry (rank ans file), I chose this as it has the scalloped edge - I cut the mustache off using a sharp knife.
  • The NCO has a musket from the Russian officer.
I appreciate the lace is all wrong, however they do what I always wanted from this range - look the part even if not 100% correct.

The figures are singly based as I am planning to use thenm with the recently published 'A Gentleman's War' rules.

Next up some Austrian Light troops. I fancy painting up 'Grun Loudon'............what figures to use???










Thursday 18 September 2014

Light Infantry (2) - Grenz & Pandours

Last updated 19/09/14.........

Following on from discussions about Frei Corps and Jager, some thoughts about the Grenz and Pandour. A hole in the PA range which needs filling.

Pandour Uniforms

Austrian Grenz


There was quite a lot of variation in the uniform worn by the Austrian Grenz regiments, so one of the troop types needs to be chosen. The Pengel & Hurt book on Austrian infantry contains a lot of useful information, including the illustrations and table below.



The table is useful, as at a  glance it can be seen that the ones with coat type 'F2' are marginally more common, so it makes sense to produce a figure which represents 60-63 & 69. Below is an illustration from an Osprey book, type 'F2' is on the left and type 'E' one on the right. Of course a good representation of any of them can be done with a bit of work and a paint job. 

  3 - Gz IR 60 Carlstadt Liccaner  (F2)       2 -Gz IR 64 Waradin Creutzer  (E) 



Russian Pandours









There is another reason for choosing the 'F2' type - it is also the one which is most similar to the Russian pandour regiments.

There are minor differences, but the Austrian figure is pretty close. 

This is a grenadier, others would be similar but with no plate on the hat.


















Head Types

This really depends how many moulds are made, as depending on what else goes in beween two and four heads will fit.

Going back to the P&H illustrations and table it can be seen that  head types  'A' and 'D' are most common. These are very similar so just the type A would be enough, so a couple of these in each mould.

The Russian hat tapered slightly towards the top, so at least one of these.


The Cloak?

Austrian Grenz were famous for their red cloaks, which were generally rolled up over the haversack, but as far as I am aware there are no illustrations showing the Russian Pandour with them (if anyone has some let me know), so there are really three options:

  • Give all the figures a cloak, and accept the Russians will be wrong
  • Give none of them a cloak
  • Cast the cloak a stick on - not sure how easy this is for multiple poses.

What does everyone think?


Officers

Grenz officers were very similar to  those in the Hungarians, so I would suggest  there is no need for additional figures.


Poses

As there is no need for officer figures, and following on from earlier discussions on poses I would be temped to have two moulds, so four figures, and I would go for:

1. Infantry standing firing
2. Infantry kneeling firing
3. Infantry advancing
4. Not sure, options (in current order of preference):
      a. Infantry loading
      b. Infantry/NCO at trail, pointing
      c. Musician

As usual comments welcome.

Sunday 14 September 2014

Light Infantry (1) - Frei Corps & Jager

Last updated 20/09/14

What should the range cover?


Some initial thoughts on light infantry. These moulds are still a long way off;  but it is worth thinking about what is wanted before sculpting begins.

There was a lot of minor variation in the dress of the light troops during the Seven Years War; in a conventional cast range this could warrant many different figures. However it is not practical to cover all these minor variations in this range, so the aim is therefore to produce the minimum number of moulds which will give a reasonable coverage of 'light' infantry, my current thinking is tending towards four sets, only the first three of which will be covered in the Prussians, Austrian and Russian releases:

  • Frei corps (2 moulds) in western style uniforms and armed with musket/bayonet (discussed below)
  • Jager (one mould) in western style uniforms armed with rifle (discussed below)
  • Croats and pandour (2 moulds) in their distinctive more eastern dress (a later post)
  • In the western theatre there are also the Scottish regiments in the British army (but they are a very long way off). 
This first post, which is intended to decide on the best poses for the range will only discuss the Frei Corps types. However a the Croats are not available in any form either in this range or previous ranges it might be worth putting those into production first.


Frei Corps


The frei corps are best covered with a set of bodies which are representative of all nations. These cannot be correct for all of them, so just reasonably close. - possibly similar to the Prussian line infantry, perhaps without the bread bag?

Most such troops would wear the tricorn, but there were exceptions such as the chap on the right with a casket (and in the French army the mirliton).

The figures can then also usefully be used to form the close order firing line for anyone who wants to do so.


Jager


The jagers carried a rifle which was shorter than a musket, and often wore boots rather than gaiters.

They are also often shown with lighter equipment than the frei corps and line, so perhaps dispense with both the haversack and bread bag.

The figure shown is an Austrian in a casket, a Prussian would be similar but wearing a tricorn.










Heads


The frei corps units generally wore the tricorn type of their line troops, but there were exceptions. Prussian Jager wore a tricorn similar to their musketeers, but the Austrians a distinctive casket. As far as I can see this is what needs covering:

Frei corps
 - Prussian tricorn
 - Austrian tricorn
 - Casket
 - Mirliton


Jager
 - Prussian tricorn
-  Casket


Poses

The poses need to be suitable for spreading out in a skirmish line. Also I would like to try and retain some of the the character of the old Holger Eriksson (HE) range.

There is no need for advancing figures as these are fully covered in the close order troops.

Initially I thought that three moulds, and six figures would be needed, but current feedback suggests that this could possibly done with just four figures, but not rule out doing six. My ideas are listed below.


Rank & File Firing


Holger Eriksson - PA23



Firstly I think the two classic firing poses similar to the HE originals. (there are similar figures in the Karoliners).


These two figures will also work well for anyone wanting to produce units of line infantry firing.




Holger Eriksson - PA24













Officer


Holger Eriksson - PA30



I have always liked the pose of the old HE standing figure (but the actual castings are not particularly good.). An updated figure similar to this, with the uniform  of a Prussian officer would be a valuable addition to the range and would also fit well in artillery and command groups.












Great Northern Wars - PADK101


Alternatively,  if  something a bit more dynamic is needed, raise the left arm similar to the Great Northern Wars figure,  and make the right hand able to carry sword, pole arm or musket?

However currently all 'votes' seem to be for the old HE figure.











Other options?


A standing musician, not sure if a drummer, trumpeter, fifer or hornist is most appropriate?

















For the light troops it is worth adding a loading pose to add some variety into the skirmish line. PA already produce loading figures in their Rossbach and Karoliner ranges,It is probably more likely the the first figure with the ram rod in the right hand is more correct, but possibly with the musket angled forward?



Karoliner - PAS914
Rossbach -  PA51












Holger Eriksson - PA25
NCO/Standard Bearer.It might be worth making a standing NCO figure 'dual purpose' carrying either a standard or a pole arm. 

The figure pose could be similar to the HE standing musketeer, but with the right hand a bit higher to hold a flag or pole arm. Uniformed as the Prussian NCO

The figure could also be given a sponge or ram rod to find his way into a gun crew.










An infantryman priming his pan?


What to Make?


There have been some useful suggestions from Rahway and Ross; and I am wondering about only two moulds for the Frei Corps types, and then a mould for the Jagers, say:

    1.  Frei corps standing firing
    2.  Frei corps kneeling
    3.  Frei corps officer standing
    4.  Frei corps standing, one of:
             a.  NCO/Standard bearer standing
             b.  Loading
             c.  Priming pan
             d. Musician

    5. Jager kneeling firing
    6. Jager, one of
             a. Advancing
             b. Advancing at trail
             c. Loading
             d. Priming pan

These figures are still a long way off; however thoughts comments and ideas are welcome and I will update the page at intervals as any comments or ideas  come in.